Ultrasonic Sensor Vehicle Parking Management System For Indoor Car Parking

Smart car parking guidance system ultrasonic sensor for Indoor Car Parking

1. Introduction

TUS-202 ultrasonic parking lots detector is used to detect weather the vehicles is being or not with the set distance by the way of ultrasonic reflection. The work principle is according to the ultrasonic which was send from up to down by the ultrasonic detector, detect exactly weather every park lot is occupied or not and the information will be send at last.

Industrial design

Advanced ultrasonic detect mode

The advanced way of detection is used. the misforecast question caused by the outside disturbance or the environment changing is hard to be happened  like  the other detection way of infrared way or microwave ;

With Highly Anti-disturbance capability to avoid wrong judgment.

Easy to install and maintain.

The adjustable height range is 1.0m to 3.5m.

 The height brightness diode indicator light indication detective status;

1S or 5S of sign output delay can be choosing through the outer switch.

3. Technical data

• Operating Voltage: 12VAC
• Operating temp.: -20°C to 65°C
• Storage temp.:       -40°C to +85°C
• Operating relative humidity: 30%-90%
• Used condition: installed on the parking lot it usually installed with the probe down in ceiling in a way of suction top.
• Shell dimension: diameter10 centimeters× height 4.5centimetersweight :140g
• Height range 1.0-3.5m (adjustable)

4. Communication Interface

4.1 Power and bus communication protocol

4.2 Externally connected LED light interface