outdoor indoor antirust, durable tripod turnstile entry systems gate for entrance control

2012 tripod turnstile gate for entrance control

Parameters:

material : stainless steel

working environment: indoor and outdoor

working temperature: -30°C~+70°C

humidity: ≤95% no condensing

Size: L*W*H=1200*280*1000mm

Railing length: 500mm

Channel width: 500-600mm

railing angle in turn: 120 °; railing turning direction: single way and Bi-direction.

Working voltage: AC220V 50HZ input, DC24V(2000mA) direct current safe voltage drive

input interface: 12V level signal or pulse width >100ms 12v pulse signal, drive current>200mA support different kinds of signal input.

passing speed: ≤ 40 person/min

Communication interface: standard RS485 agreement, communication distance ≤1200 m

MCB F: one million

Lifetime: more than ten years

Main feature:
1 The equipment material is stainless steel with cold pressing and bending technology, with no clearance weld. Beautiful design, antirust, durable.
2 the width of stainless steel box is 2mm

3 Reliable performance, rejecting personal interference, add over current protection, prolong the life time.
4 Connect with fingerprint, RF ID/IC card, palm print equipment, time attendance, door access control, consumption equipment conveniently.
5 The whole equipment is designed with stainless steel and water proof. It is hard to be influenced by outside environment. The movement of the motor has been through grinding process with low noisy.
6,the tripod turnstile has self-check function. It is can be realize the working conditions through the indicator to debugging.
7 when the power off, the railing drop, and when the power, hold the railing by manual, and after reading card, it is automatically stepping forward 15°.
8 it is reliable and don’t bounce when people pass, at the same time, the pedestrian’s information will display, one time card reading for one person.
9 put the railing with sheath to prevent children or pedestrian hurt by crashing, in the open air it can sucking water.
10 The master board has counter function, so if no body pass, it come back to the initial position.