Hight Quality Tripod Turnstile Barrier Gate
(1) When power off, it will be dropped the arm to the request of fire protection (default) or free pass Mode (option). When the power is on again, the arms can also lift by hand.
(2) The equipment is integrated with delicate mechanical transmission,
microprocessor control, and various read/write techniques. It can be used for intelligent control and management of the passage after equipped with different read/write devices.
(3) The system is provided with a standard electric interface and is easily integrated into the equipment with read/write facilities such as magnetic card,
bar code card, ID card and IC card. As a result, an orderly and civilized passage is provided for the personnel in and out, and illegal personnel can be barred. At the sametime, a special fire control interface is equipped in the system to meet the requir ement of fire control passage, so that a rapid down rod control may be realized in emergency for
Typical areas of application are: office building, governmental buildings, banks, hotel, super market ,and park.
1,Both directions can be set as controlled mode or free mode
2,Reset automatically: Go signal will be cancelled if passage through is not completed within preset time. The standard default is 5 seconds (time adjustable by software)
3,When power off, it will be dropped the arm to the request of fire protection
(default) or free pass mode
4,Anti backup function to prevent reverse rotation once the mechanism has move 60 degree from home
5,Optional indication of outside LED counter
6,With interface of switch of relay,compatible with all the access controller
7,Alarm time and numbers adjustable; With RS232/ RS485; Extendable with CAN BUS and Ethernet
8,Anti backup function to prevent reverse rotation once the mechanism has move 60 degree from home
9,Equipped with free control software for human machine interface & control command SDK
FRAME WORK SPECIFICATIONS
1,Framework: 304(default) /316 Grade Stainless Steel
2,Thickness of ply: 1.5mm (default)/ 2.0mm
3,Finish: Brushed surface (default)/ polishing surface
4,Shell size: 1200*280*990mm (Standard)
5,Arm’s length : 500-650mm; Arm diameter: 35-48mm6,The maximum tolerance of the pole:70 Kg.
7,Working driving force of the pole: 3Kg8,The inductive card reader dimension: equipped with the standard mounting brackets, or tailor made
Please feel free to contact us as below
Contact person:Miss Regina